DU-FLP-0008-53 Rev C 03/28/16 GCX Corp Page 1 of 6
Installation Guide
Folding L-Bracket for Flat Panel/Keyboard Applications with Multi-Position Work Surface
(Refer to qualified personnel)
MAX. LOAD
: When mounted on VHM Variable Height Arm maximum load shall be kept below
25lbs/11.3kg
– The VHM used must be load rated for a minimum of 40lbs/18.1kg.
WARNING
: The combination of a support arm and the L-Bracket presents a potential pinch
hazard at all points and positions where the support arm and L-Bracket can come into contact.
CAUTION
: Do not place fingers or cables in-between the Folding Keyboard Bracket Mounting
Block and the Mounting Plate surfaces. There is risk of pinching or crushing fingers and cables,
especially while installing the keyboard tray and adjusting the folding tension.
Purpose:
1. Describe attachment of L-bracket to Arm (page 2).
2. Describe attachment of Keyboard tray with Multi-Position Work Surface (page 3)
3. Describe attachment of Display Mounting Bracket to Display (page 3).
4. Describe adjustment of display height (page 4).
5. Describe adjustment of display tilt tension (page 4).
6. Describe folding tension adjustment (page 4).
7. Describe operation of Multi Position Work Surface (page 5).
8. Describe Storage Bin attachment (page 6).
23875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180
