DU-FLP-0008-11 Rev B 2/20/08 GCX Corp Page 2 of 3
Attaching Display Bar to 1.25'' or 2'' Post
1. Using the 5/32'' hex wrench (provided), fasten Display Bar to corresponding threaded holes in top of the Post with
three (3) #10-32 x 1-1/8'' SHCS. Note different mounting patterns in photos below.
Attaching Display Bar to VHM or M-Series Arm Swivel Head
1.
VHM Only:
Fasten 5'' Extension (provided) to Swivel Head with three (3) #10-32 x 3/4'' FHMS (below left).
2. Using the 5/32'' hex wrench provided, fasten Display Bar to end of Extension (VHM) or directly to Swivel Head (M-
Series) with three (3) #10-32 x 3/4'' SHCS (below right).
Attaching Display Bar to VHRS Post
1. Using the 5/32'' hex wrench (provided), fasten Display Bar to Post with three (3) #10-32 x 3/4'' SHCS (below right).
#10-32 x 3/4'' FHMS (3)
5'' Extension
Swivel Head
Display Bar
#10-32 x 3/4'' SHCS (3)
VHRS Post
#10-32 x 3/4'' SHCS (3)
Display Bar
Display Bar
VHM Arm
M-Series Arm
Threaded Holes (3)on
1.25'' or 2'' Post (2'' shown)
Display Bar
on 2'' Post
#10-32 x 1-1/8'' SHCS (3)
(Larger Mounting Pattern)
Display Bar
on 1.25'' Post
#10-32 x 1-1/8'' SHCS (3)
(Smaller Mounting Pattern)