DU-FLP-0002-17 Rev D 11/17/05 GCX Corp. Page 3 of 3
Mounting Display on Slide-on Mounting Plate
VESA Mounting Adapter may also be used to mount flat panel display on a typical slide-on mounting plate.
1. Slide Mounting Adapter into Mounting Plate while pulling spring-loaded plunger at bottom of Plate. Plunger will snap
into clearance hole when monitor is correctly mounted. Tighten all Nylon screws on rear of Mounting Plate.
Installation Note:
Number of Nylon Screws on the rear of Mounting Plate varies depending on application.
Using Nylon Spacers
An assortment of Nylon spacers and longer M4 pan head screws (see
Parts Reference
) are included for extending
Mounting Plate or Mounting Adapter out of recessed mounting area in display housing.
Use spacers as shown below and follow applicable mounting procedure on page 2.
Nylon Screws
Clearance Hole
Slide-on Mounting Plate
Plunger
Four (4) Spacers between
VESA Mounting Adapter
and Display
Four (4) Spacers between
Mounting Plate and Display
Mounting Plate
VESA Mounting Adapter