11
5. Recall mode (To review system data)
5.1 GPS DATA FORMAT
A command can be sent to the tracker to ask for the instructed GPS data format
information. Command for this info request is:
Password-R-GPS
A SMS will be sent with GPS data (DMS, Ddec or other)
5.2 TRACKING MODE Settings
A command can be sent to the tracker to reveal the last set “Track” Mode parameters
T
,
R
and
C
. Command structure of the “Track” mode settings request is:
Password-R-TRK
A SMS will be sent to indicate the set parameters of time between GPS transmission (T),
number of repeats (R) and SMS check time (C). Example:
TRK :T0003R020C010
5.3 TEL MODE (Overriding caller ID)
Request for telephone number where SMS messages will be sent. This can be the caller
ID or the new instructed Phone number where the GPS data has to be sent to. Command
structure for “TEL” request is:
Password-R-TEL
5.4 GEOFENCE Setting
Request for Radius of Geofence circle. Command structure of the “Geo” request is:
Password-R-GEO
A SMS will be sent to indicate the Geo-fence radius in meters.
5.5 SOS PHONE NUMBERS
A command can be sent to the tracker to reveal the last set SOS phone numbers.
Command structure of the SOS phone numbers request is:
Password-R-SOSx
Where
X
is position number of the stored SOS phone number.
SOS1
means phone number of SOS1.
SOS2
means phone number of SOS2, and so on.
5.6 MOTION SENSOR Setting
To find out if the Motion Sensor is ON or OFF, the following command can be sent:
Password-R-M
A SMS will be sent to reveal if the Motion sensor is switched ON, or OFF.
