PAGE 17
3�Press
to select CTCSS, DCS or OFF� Under DCS
mode, press
key to switch between Normal and
Invert �
4� Rotate the Channel Selection Knob to choose a
CTCSS/DCS code�
5� CTCSS: 50 sets, from 67HZ to 245�1HZ�
6� DCS: 1024 sets from 000N to 777I� “N “for Normal , “I” for Invert
7� Press
key to confirm and exit�
CTCSS/DCS Encoding/decoding simultaneously
This setting can program CTCSS/DCS at the same time�
1�Press
key and till LCD display appears “FUN”
on the up-left corner� Then press
key to enter
the menu mode�
2� Press
key to select “C-CDC” under
menu item 003�
3� Press
key to choose CTCSS, DCS or OFF� Under
DCS mode, press
key to switch between N and I�
4� Rotate the Channel Selection Knob to choose a CTCSS/DCS code�
5� CTCSS: 50 sets, from 67HZ to 245�1HZ�
6� DCS:1024 sets from 000N to 777I, “N “for Normal , “I” for Invert�
7� Press
key to confirm and exit�
Offset Interval Setting
This function is to enable you to communicate with
other transceivers through a repeater� The repeater
use different frequencies to transmit and receive a signal� The interval
between the two frequencies called offset�
1�Press
key and till LCD display appears “FUN” on the up-left cor-
ner� Then press
key to enter the menu mode�
2� Press
key to select “0�100” under menu item 004�
