4
The Infrared Sensor does not light up. It receives signals from the Remote Control and Keyboard.
Always make sure that there is a clear path between the Remote Control and the Infrared Sensor
devices to ensure that the STB signals are unobstructed.
Technical Specification
IMPORTANT
§
Do not expose the STB to water or operate in a damp environment.
§
Do not use the power cord with an outlet or extension cord that does not allow both
prongs to be fully inserted.
§
Do not overload power outlets.
§
Do not place the STB in direct sunlight or near a heat source.
§
Do not allow anything to rest on or roll over the power cord.
§
Unplug STB during a lighting storm.
§
Do not put or allow anything to fall into the STB unit.
§
Do not place anything on top of the STB unit, especially:
§
Liquid (drinks, etc.)
§
Flammable items (clothes, papers, etc.)
Any object that may obstruct airflow through the vents (Books, magazines, other
electrical components, such as a VCR, etc.)
Summary of Contents for 6086N2 VIA C3 SERIES
Page 6: ...5 Board Diagram...
