2
IR Interface
Yes
Audio/Video Switch
(Optional) for SCART
-STV6412A audio/video switch matrix
-I
2
C control
Audio Codec
-VIA VT1611A audio codec with 3D
-AC97 2.1 compliant codec
-Legacy audio SBPRO compatible
Drive Bay
2 x 3.5" device (Metallic6086N2 model)
OnBoard IDE
2 x Ultra DMA33
Floppy Disk Connector
Desktop type
Microphone Board
Two 6.1mm phone jacks
BIOS
-Award BIOS with APM
-DIP 2Mb flash w/ boot block supported
-Power management support APM1.2, ACPI
Box Dimension
430mm x 320mm x 80mm (WxDxH,
Matellic6086N
2
model)
340mm x 274mm x 60 mm (WxDxH,
STB6086N
2
model)
Power Supply
ATX 77W; 5V, 12V, 100-264 V auto switching
Software Supported
Microsoft Win95,Win 98, NT, WinCE, RTOS QNX, Citrix, Linux
Rear Panel
-D-sub 15 pin VGA connector
-Dual Stacked SCART connector (European)
-CBVS composite out (RCA jack yellow)
-Audio out port (RCA jack white,red)
-S-Video (4-pins DIN)
-SPDIF output (RCA jack orange)
-Two LAN ports (RJ-45)
-Dual stacked USB port
-6-pin mini DIN connector in PS/2 keyboard and PS/2 mouse, require auto detection
between IR K/B
-3.5mm mini phone jack x 1 for microphone input
Board Form Factor
-Dimension 220mm x 242mm
-4 layer PCB, 6 mil minimum trace width and spacing
-All components in primary side
DVD ROM (optional)
support EIDE DVD ROM
Riser Card
Support two 3.3V PCI slots
(Metallic 6086N
2
Model)
Support one 3.3V PCI slot
(STB 6086N
2
Model)
Summary of Contents for 6086N2 VIA C3 SERIES
Page 6: ...5 Board Diagram...
