GCE Vectrex Hyper Chase, Manual

Page: 5 / 16

5
!
Make sure the console power cord is plugged into
a 120 volt AC 60 cycle electrical outlet.
! Check to be sure the plug for the built-in control
panel is firmly seated in the control panel outlet
on the right.
! Make sure the console is turned OFF before inser-
ting the cartridge. Insert the cartridge into the slot
with the label side up. Be sure it is firmly inserted
to the guideline marked on the cartridge.
! Insert the screen overlay behind the tabs at the
top and bottom of the screen.
! Turn the OFF
/
ON
/
VOLUME CONTROL to the
ON position (clockwise). You will see the Vectrex
title for a few seconds, then the name of the game.
! Adjust the volume control to the desired listening
level.