GCE druva PPLH0FT, Instructions For Use Manual

Page: 5 / 44

5/44
EN
1.3. EXPLANATION OF SYMBOLS
SAFETY INFORMATION
Safety information is highlighted by symbols in these instruc-
tions. This safety information is preceded by signal words that
defi ne the extent of risk.
DANGER!
This combination of symbol and signal word indicates an im-
mediately dangerous situation that will cause death or severe
injury if not avoided.
WARNING!
This combination of symbol and signal word indicates a pos-
sibly dangerous situation that can cause death or severe injury
if not avoided.
BEWARE!
This combination of symbol and signal word indicates a pos-
sibly dangerous situation that can cause minor injury if not
avoided.
NOTE!
This combination of symbol and signal word indicates a pos-
sibly dangerous situation that can cause property and environ-
mental damage if not avoided.
TIPS AND RECOMMENDATIONS
This symbol highlights useful tips and recommendations, to-
gether with help for ensuring effi cient and trouble-free opera-
tion.
SPECIAL SAFETY
INFORMATION
The following symbols are used in the safety information to
draw your attention to particular risks.
DANGER!
This combination of symbol and signal word indicates an im-
mediately dangerous situation involving electrical current. Ig-
noring such a warning could result in severe or fatal injuries.
1.4. LIMITATIONS OF LIABILITY
All of the information and notes in these instructions have been compiled in accordance with applicable
standards and regulations. They refl ect best engineering practice and our years of experience.
The manufacturer accepts no liability for damages in the following instances:
•
Failure to observe these instructions
•
Utilization of the system for any other than the intended purpose
•
Operation by untrained staff
•
Unauthorized modifi cations
•
Technical modifi cations
•
Use of unlicensed spare parts
•
Working with the gas supply panel when any safety device is broken or not functional mounted or safety
devices don’t work correctly
•
Improper control of components, connections and gaskets, which are wearing parts.
•
Incorrect reparations
•
Violation of temperature limits, which are dedicated in the datasheet during operation or storage
•
In case of disaster or force majeure
The actual scope of supply may diff er from the explanations and illustrations in these instructions following
the incorporation of new technical changes.