GCC Technologies LFC, User Manual

Page: 66 / 75

LFC-D Workstation User Manual 63
7.1 I/O Pin Assignments
The I/O terminal connector is located on the bottom rear of LFC workstation, and the definition
corresponding with the input and output signals on the G-Mark software as follows.
(1)
Input pins
I/O TYPE DESRIPTION
P1~P2 INPUT
There are 2 input signals (External device → LFC)
available to communicate with external devices.
P3~P4 OUTPUT
There are 2 output signals (LFC → External device)
available to communicate with external devices.
P5 INPUT
When Start- pin and Ground pin are at short status,
laser marker will trigger the fire.
P6 INPUT
When Stop- pin and Ground pin are at short status,
laser marker will stop working.
P7 INPUT
This is terminal used to connect external emergency
stop.
P8 GND Ground
The pin 1~4 & pin 7~16 from Input status
are not available to communicate with
laser marker.
Not Available