GCC Technologies LFC, User Manual

Page: 63 / 75

LFC-D Workstation User Manual 60
Step 3. Put the marking object on the Z-axis table
Step 4. Put down the pyramid focus tool, and then move the Z-axis table up or down until
the object touches the bottom screw of pyramid ruler.
Step 5. Open / import the marking file from G-Mark marking software.
Step 6.
After editing, click “Marking” button, and then the “Marking” window will pop up.
Step 7. C
lick “Exec” button from G-Mark marking software to starting the job.
NOTE
The auto door will always open in the service mode, please ware goggle to operate
the machine.