GCC Technologies Expert Pro Series, Maintenance Manual

Page: 29 / 58

29
Belt Tension Adjustment
Tool adjustment for tool carriage transmission belt
X`To replace the tool carriage or belt it self, the belt tension needs to be adjusted to g . Refer to
Fig 1-5 and the following steps.
Step 1. Move the tool carriage to one end of the guide beam.
Step 2. First place the top arm gauge in the top track of guide beam. Then the bottom arm will click into the bottom
track. (see Fig 1-5)
Step 3. Make the white cylinder is flush with the belt surface. Tug on the wire a couple times to ensure full contact
between both surfaces.
Step 4. The desire tension is 4g. To change belt tension, adjust the screws as per
Step 5. Fasten the retaining nut.
White cylinder
Fig 1-5