64
• If the printer driver has not yet been installed for the printer, install it according to
the instructions starting on Page 55 of this guide.
• Click on the Start button. Select Settings and then Printers.
• Locate the icon for the Elite 21 printer that you have installed. Right-click on the
printer icon and select Properties.
• Click on the Details tab at the top of the Properties window. The following
window should appear:
• The new port that was created for the printer should appear on the list of available
ports. Click on this port to select it from the list, then click OK to accept the new
setting. This will allow the PC to send jobs to the printer over TCP/IP. Repeat this
procedure on all PCs that are to use the printer over TCP/IP.
