20
2. Right-click on the GCC printer icon, and choose Properties in the pop-up
menu.
3. Choose the PostScript tab in this dialog box.
4. Click on the Advanced button.
5. There are two checkboxes relating to Ctrl-d at the bottom of this dialog
box. Clear both of them.
6. Click on OK twice to return to the Windows 95 desktop.
Special NEST considerations
• Although you can use your GCC printer with either an external print server or the
internal print server, the internal print server cannot service an external printer.
• When you use the internal print server, the printer must be configured as printer zero
(0).
• Your printer must be configured as “other remote/unknown.”
Problems you may encounter
Config Page NEST info
You can find information about the current status of your printer by printing a
configuration page, unless the printer is in PCL only mode.
1. Make sure the printer’s display shows “Ready.”
2. Press the “On Line” button to take the printer off line.
3. Press the menu button eight times, until you see the words “Print Info
Pages: Configuration” in the display.
4. Press the Enter button. The printer will warm up, then it will print a
configuration page.
5. When the page has printed, press the “On Line” button to take the
printer on line.
NEST information is displayed at the bottom of the left column of the configuration page.
Typical problems with solutions
You can get information about your printer either by running the Config tool program,
checking settings in the printer’s control panel, or by printing a configuration page.
• The Config tool doesn’t show my printer.
