GCC Technologies AFR-24S, User Manual

Page: 115 / 235

AFR-24S User Manual
115
7.3 Cutting Plotter/Computer Communication Problems
The messages showed below present problems in relation to cutting plotter/computer
communication.
Communication Error
Setup:
MISC. key
Is the connection cable
connected to the cutting plotter
and computer properly?
Yes No
Has the interface setting
been done correctly? Refer to Chapter 2 -
Connecting your cutting
plotter.
Yes No
Try the communication
between your cutting plotter
and computer. If it still does
not work, have your cutting
plotter serviced.
Refer to the “
MISC
” key in
Chapter 3 - Description of
Operation for the port setup.
If your cutting plotter cannot recognize the
HP-GL/2 or HP-GL commands, please
check the HP-GL/2 or HP-GL commands
applied to your cutting plotter are used
properly.
Note:
The computer also needs to set up compatible communication
parameters to the cutting plotter set up.
HP-GL/2 Cmd. Error