MACHINE OPERATION
OPERATION
The following section describes how to operate and use the grinding machine. The section does
not deal with the technical aspects of grinding such as choice of grinding tool etc.
NOTE :
Only personnel with the requisite training may operate the machine.
It is assumed that the relevant personnel have read the safety regulations.
And that the machine is positioned on the surface intended for grinding, that the surface is not
inclined and that the grinding disks are mounted.
▣ TIP : Right position to start.
** If you start on concrete surface may be damaged for the motor due to the load.
MEASURES PERIOD TO START :
1. Inspect the floor carefully and remove any protruding items such as reinforcement bars and
bolts, as well as any loose material that could get caught in the machine.
2. Set the handle bar in the desired working position.
3. Fit the appropriate tools to the machine.
4. Mount and check the splashguard.
5. Connect the voltage to the terminal on the side of the frequency converter.
6. If the floor is dry ground, a dust extractor should be connected and started before staring the
machine.
START OF MACHINE :
1. Push the on button.
MAINTENANCE
Always clean the machine after use. Do not use a pressure washer as this can force water into
various components causing damage. We recommend the regular inspected once three month
and change if worn.
