Operation
•
GLS3230 & GLX2030 only.
After unpacking the product,
pull out the shredder bag frame and remove the CD shard
tray, which sits on top of the bag frame. Store this tray on
the bag frame as shown and use when you shred CD’s
or credit cards to separate waste for recycling. On the
GLM1130 and GLHS930 high security models, the CD tray
can be left permanently in position in the shredder.
• Flip up the oil cap and fill up the reservoir using the 60ml
bottle of oil provided*. Close the cap.
• Connect shredder to mains supply.
• Check that the on/off switch at the back of the machine is
switched to the ‘ON’ position.
• Press and hold down the Auto button (f) for 5 seconds to
start the pump and prime the system. Only required when
the product is used for the first time.
• To commence shredding, press the auto feed button. This
sets the shredder into auto mode.
• Insert paper to be shredded into the feed area. The
shredder will detect the paper and start automatically.
• If the shredder is left in auto mode for more than 2 minutes
without being used, the shredder will automatically turn
back to standby mode in order to save power.
• The shredder will automatically ‘wake up’ from sleep mode
when paper is inserted into the shredder mouth. There is no
need to press the Auto button (f).
* Replacement oil bottle No. 1760049
CD and Credit Card Shredding
• A separate CD tray is provided to collect the shredded CD
shards. On the GLS3230 and GLX2030, ensure that this is
correctly mounted onto the standard shredder bag frame
before shredding CD’s or credit cards. The GLM1130 &
GLHS930 models are supplied with a separate CD bin,
which fits on the front of the bag frame. CD and credit card
shards should be disposed of separately from paper.
• Always shred CD’s and credit cards through the safety
guard slot (h). Only shred 1 credit card or 1 CD at a time.
• Empty the CD tray or CD bin after 8 credit cards or CD’s to
avoid waste spilling over into the paper waste bin.
GLS3230 & GLX2030 only.
Remove the CD tray before
starting to shred paper again and store on the bag frame.
6
GLS3230/GLX2030
GLM1130/GLHS930
