![background image](http://html1.mh-extra.com/html/gbc/quantum-p70ix/quantum-p70ix_instruction-manual_3868247016.webp)
5. Graphical User Interface
HOME SCREEN INTRODUCTION
GBC QUANTUM PUNCH
90 LPM
7
MODE
PROOF
UNLOAD
JOB MANAGER
LANGUAGE
1 2 3
4 5 6
7 8 9
0 OK
The Home Screen is the starting point for operation of the Quantum P70iX. At
this screen, you are able to see the job that the Quantum is ready to run. In the
example above, the Quantum is setup to run the following job:
• A paper size of 8.5” x 11” with punching on the 11” side.
• A lift thickness of “7” which is approximately 7 sheets of 24 pound paper.
• The speed is set at 90 LPM (lifts per minute).
• Punching holes using a PB (Plastic Bind) die with a back gauge of .141”.
• The Quantum is also operating with the controls in English.
If these job settings are acceptable, you may start your job by simply:
• Loading your paper on the input belts.
• Pressing the green start button ( ).
15