GBC Fusion 5000L, Instruction Manual

Page: 7 / 14

5
touching guides.
4. When you are finished
laminating tap the ‘power’ button
and if equired remove the tray,
unplug and store accordingly.
NOTE: On Power Off there will continue to
be a noise emitted from the unit for
approximately 30 senconds this is for
cooling purposes
Upon exiting remove your
laminated item immediately
and lay on a flat surface to
ensure optimal quality.
Intelligent Power Off
For added safety and
environmental reasons the
laminator will automatically go
into sleep mode after 30 minutes
of inactivity. You will hear a single
beep before this occurs.
Cleaning
Guarantee
WARNING:UNPLUG THIS
PRODUCT BEFORE
CLEANING THE EXTERIOR. WIPE
EXTERIOR ONLY WITH A DAMP
CLOTH AND DO NOT USE
DETERGENTS OR SOLVENTS.
Regularly feed a cleaning card or
sheet of paper through the laminator
to clean the rollers. Cleaning sheet
order code: EK50000.
Operation of this machine is guaranteed for
two years from date of purchase, subject
to normal use. Within the guarantee period,
ACCO Brands Europe will at its own
discretion either repair or replace the
defective machine free of charge. Defects
due to misuse or use for inappropriate
purposes are not covered under the
guarantee. Proof of date of purchase will
be required. Repairs or alterations made by
persons not authorised by ACCO Brands
Europe will invalidate the guarantee. It is
our aim to ensure that our products erform
to the specifications stated. This guarantee
does not affect the legal rights which
consumers have under applicable national
legislation governing the sale of goods.
Additional Features
Intelligent Status Alert
If pouch misfeeds or jam starts
to occur a series of beeps will be
heard - and the laminator will
automatically reverse the
document out ( ).
NOTE: Never reuse a misfed or jammed
pouch
Intelligent Pouch Reverse
To recover a partially fed pouch
press and hold the “Reverse”
( << ) button and the pouch will be
quickly reversed out of the
laminator. You will hear a series of
single beeps until Reverse button
( << ) is released.
NOTE: Do not put partially laminated items
back into the laminator.