3
Technical Specifications
Electrical
Machine
Dimensions
Machine Weight
Maximum
Pouch Width
Maximum
Pouch Thickness
Maximum Thru-put
Thickness
Warm-Up Time
Speed
Fusion
1000L A4
220-240V~ 50/60Hz
400W / 1.8A
Fusion
1000L A3
220-240V~ 50/60Hz
520W / 2.4A
A4:
373.5
x
107.5
x
84.5
mm
A3:
468.5
x
109
x
86
mm
A4: 1.13
kg
A3: 1.56
kg
A4: 241
mm
A3: 303
mm
2 x 75 micron
(total 150)
0.7mm
Approximately
4 minutes
330 mm per minute
• Active anti jam feature
may not detect issue on
smaller items
• Failure to comply will
result in damage and
invalidate guarantee
Service
Do not attempt to service
or repair the pouch laminator
yourself. Unplug the unit
and contact an authorised
GBC service representative
for any required repairs.
Getting Ready to Laminate
Easy Set Up
1. Take the electrical plug and
place in an appropriate power
source, which is near the table you
intend to use.
2. To use the laminator move the
slider to the right from the ‘ ’ to
the ‘75 micron’ position. Below
the slider you will see a white
line, this indicates that you have
switched the laminator on.
NOTE:
Only move slider to ‘ ’ for cold
lamination. Follow the instructions
included with your GBC self adhesive
laminate or other pressure sensitive, non
thermal laminating pouches.
Visual Ready Alert
3. The laminator will start to warm
up. When the laminator is ready
to use the green light next to the
‘tick ’ is illuminated.
NOTE:
Your new laminator may emit a
slight odour during the initial operation.
Its is normal and will diminish after a few
hours of operation.