![background image](http://html1.mh-extra.com/html/gbc/boiler-1-4-k/boiler-1-4-k_instruction-manual_3852230058.webp)
58
BOILER
1”
-
4”
K
Istruzioni originali—rev.2011—in accordo al 1.7.4 della direttiva macchine 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Sandro Pertini 41/43 –
25046
Cazzago San Martino (Bs) –
Italia –
Tel. + 39 030 7451154 –
Fax. + 39 030 73 56 629
GBC RECOMMEND TO PERFORM A SERVICE CHECK C/O G.B.C.
INDUSTRIAL TOOLS S.P.A. OR ITS SPECIALIZED TECHNICIAN
EVERY 400 WORKING HOURS
•
Verify the general conditions of the machine;
•
Always use the lubricator when using pneumatic machines
•
Ensure the lubricator is mounted the nearest possible to the machine and
that the lubricant contained is supplied by G.B.C. In
-
dustrial Tools S.p.A. only.
•
Perform a compressed air periodical cleaning on the threaded part of the guid-
ing shaft and in the rear part of the machine.
•
Always ensure that the seats of the tools on the chuck are clean
•
Every 20 –
30
hours ensure the security valve has no air leaks
•
Ensure no air leaks are present on the air supply system nearby the connection
between the machine and the hose.
•
Introduce some drops of gasoline or similar oily solvent in the air intake nipple
of the pneumatic motor and start the machine in idle.
•
Always use well sharpened tools to obtain the maximum result.
G.B.C. Industrial Tools is at your disposal for any information you may re
-
quire
about the above mentioned procedures and for any general clarification you may
need.