AUTO+ 300X & 300M
™ SHREDDERS
11
GB
Lubrication of the Shredder
Only use GBC Oil Sheets (G2101948) to lubricate. ACCO
Brands accepts no liability for product performance or safety
when other types or brands of lubricants are used on any
part(s) of this machine. GBC recommend using an oil sheet
after the bin has been emptied three times (and for ongoing
three bin cycle thereafter). Insert the oil sheet into the
manual feed slot and NOT in the auto-feed chamber. Using
an oil sheet in the auto-feed chamber will contaminate the
feed rollers preventing the auto-feed mechanism shredding.
Follow the maintenance instructions if the rollers become
contaminated.
Cleaning Rollers
1
The rollers on the auto-feed mechanism may become
dirty over time, please wipe clean with a dry cloth to
maintain maximum product performance.
2
The auto-start infra-red sensor, located in the paper feed
entry-slot, can occasionally become covered in paper-
dust causing the shredder to run despite no paper
being fed into the machine. Switch the shredder off at
the rear of the machine and carefully clean the sensor
using a cottonswab.
Shredder Accessories
Only use GBC Oil Sheets* (G2101948) to lubricate.
*ACCO Brands accepts no liability for product performance or
safety when other types or brands of lubricants are used on
any part(s) of this machine.
Accessory
Part Number
Quantity
Oil Sheets
G2101948
12 sheets/ pack
Service
Service is recommended every 6-12 months - for details of
your local service representative, see back page.
• In the event of a fault, unplug the unit and contact an
authorised GBC service representative for any required
repairs.
• CE Declaration of Conformity - ACCO Brands declares
that this product is in compliance with the essential
requirements and other relevant provisions of 2014/53/EU
and other applicable EC Directives.
Self-Cleaning Cutters
After emptying and replacing a full bin, the shredder will
run in forward for 4 seconds, stop for 2 seconds and then
reverse for 4 seconds to clear away any remaining paper
from the cutter mechanism. This unique ‘self-cleaning’
mechanism is additional jam prevention technology from
GBC.
Guarantee
Operation of this machine is guaranteed for two years from
date of purchase, subject to normal use. Within the guarantee
period, ACCO Brands will at its own discretion either repair
or replace the defective machine free of charge. Defects
due to misuse or use for inappropriate purposes are not
covered under the guarantee. Proof of date of purchase will
be required. Repairs or alterations made by persons not
authorised by ACCO Brands will invalidate the guarantee.
It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect the
legal rights which consumers have under applicable national
legislation governing the sale of goods.
Please note that the cutter blades will be progressively worn
down by shredding fastened sheets (staples and paperclips)
- this is not covered in the warranty. The Auto+ 300X has
been design to shred up to 25 credit cards and 25 CD/DVDs
in the standard 1 year warranty period. Any excessive credit
card or CD/DVD shredding will invalidate the cutter warranty.
