intelligent help
1
In the unlikely event of the shredder jamming, the Auto+ 200X & 200M will stop shredding,
and the jam icon will blink in orange.
2
The shredder will illuminate the FWD (
) and REV (
) buttons in the sequence necessary
to clear the jam.
3
If the jam cannot be intelligentally cleared, the jam icon (
) will illuminate in red. At this
point follow the reverse function instructions to clear any jammed material.
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop
and the bin full indicator will illuminate ( ).
8
GB
automatic jam clearance
Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Auto+ 200X and 200M
will automatically reverse and forward the engine three times to clear a jam. During this operation
the Paper Jam indicator will flash ( ).
1. operation
1
After unpacking the product, remove the CD shard tray which sits inside the shredder bin.
Store this tray on the product as shown and use when you shred CDs.
2
Connect the shredder to mains supply.
3
Ensure the ON/OFF button on the back of the machine is in the ON position, which will
illuminate the blue standby symbol ( ).
4
To commence shredding, press the Auto button ( ), which sets the shredder into auto mode.
You are now ready to shred.
5
To load the shredder, simply lift the loading door handle to open the loading door and insert
documents. You can open the door further to 90 degrees for easier access if required. Load up
to 200 sheets at a time into the feed chamber. Do not fill above the 200 MAX level, this could
damage the shredder.
6
The shredder will start the shredding cycle automatically ONLY after closing the loading door.
If there is still paper in the Autofeed chamber after first attempt, open and re-close the paper
loading door a second time.
7
If you only have up to 6/7 sheets to shred, you can use the manual feed slot, provided the auto
feed chamber is empty.
8
Insert paper to be shredded into the feed area. The shredder will detect the paper and start
automatically.
9
If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will
automatically turn back to sleep mode in order to save power.
10
The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the
shred mouth or you open the loading door. There is no need to press the Auto button ( ).
Summary of Contents for Auto+200M
Page 1: ...S H R E D D E R S Instruction Manual www accobrandsasia com A U T O 2 0 0X 2 0 0M ...
Page 2: ...7 2min 2 0 0 X 7 200 200 300X 200 7 200X 7 200 1 20 0X 200X 200 7 200 200 2 200 200 200 7 ...
Page 3: ...7 300X 7 4 7 200 200 300X 7 200X 7 3 200 200 7 200X 7 6 5 200 200 200 200 200 200 200 ...
Page 4: ......
