GBC Auto+ 100M, Instruction Manual, Page: 8 / 12

1. operation
1 Unpack the product.
2 Connect the shredder to mains supply.
3 Ensure the ON/OFF button on the back of the machine is in the ON position.
4 To commence shredding, press the central Auto button ( ). This will illuminate the blue standby
symbol on the auto button, which sets the shredder into auto mode. You are now ready to shred.
5 Press the loading door button to open the loading door. You can open the door further to
90 degrees for easier access if required. Load up to 100 sheets at a time into the feed chamber.
Do not fill above 100 MAX level, this could damage the shredder.
6 Close the loading door without pressing the loading door button. The shredder will now start
automatically. If there is still paper in the Autofeed chamber after first attempt, open and reclose
the paper loading door a second time.
7 If you only have up to 6 sheets to shred, you can use the manual feed slot, provided the auto
feed chamber is empty.
8 Insert paper to be shredded into the feed area. The shredder will detect the paper and start
automatically.
9 If the shredder is left in auto mode for more than 2 minutes without being used, the shredder
will automatically turn back to standby mode in order to save power.
10 The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the
shred mouth or you open the loading door. There is no need to press the Auto button ( ).
autofeed technology
The Auto+ 100X/100M has been designed to automatically shred up to 100 sheets from the auto-
feed chamber and up to 6 sheets through the manual feed slot. The auto-feed mechanism has
been designed to handle paper fastened with staples and paper clips and to only pull a few sheets
of paper into the cutting mechanism to minimise the risk of paper jams
8
GB
bin or loading door open safety function
As a safety precaution, if the bin or loading door is opened during shredding, the shredder will
stop and the bin full indicator will illuminate ( ).
Reverse the paper out then turn the machine off using the ON/OFF switch at the rear of the
) has been fitted for
2. reverse function
1 Should you wish to reverse paper out whilst shredding, a reverse button (
your convenience.
2
shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,
remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.
3 To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder.
Return the switch to the auto position ( ).