GBC Auto+ 100M, Instruction Manual

Page: 10 / 12

lubrication of the shredder
Only use Rexel Oil Sheets (2101948) to lubricate. ACCO Brands accepts no liability for
product performance or safety when other types or brands of lubricants are used on any part(s) of
this machine. GBC recommend using an oil sheet after the bin has been emptied three times (and
for ongoing three bin cycle thereafter). Insert the oil sheet into the manual feed slot and NOT in the
auto-feed chamber. Using an oil sheet in the auto-feed chamber will contaminate the feed rollers
preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers
become contaminated.
10
GB
Only use Rexel Oil Sheets* (2101948) to
lubricate.
Oil Sheets
shredder accessories
Accessory Part Number Quantity
2101948 12 sheets/pack
ACCO Brands (ACCO) warrants its products and their parts against defects in materials and workmanship under normal
use for a period of 12 months from the original date of purchase. During this period, ACCO will, at its discretion, in
accordance with law, either repair the shredder using new or refurbished parts, or replace the shredder with a new or
refurbished shredder that is equivalent to the shredder being replaced. The warranty applies only to defects in materials
and workmanship under normal use and does not extend to damage to the product or parts which result from:-
- alteration, repair, modification or service carried out by anyone other than an authorised ACCO service centre.
- accident, neglect, abuse or misuse owing to failure to comply with the normal operating procedures of the product.
Please note that the cutter blades will be progressively worn down by shredding fastened sheets (staples and paperclips)
- this is not covered in the warranty. The Auto+ 100X has been design to shred up to 25 credit cards in the standard 1 year
warranty period. Any excessive credit card shredding will invalidate the cutter warranty. Auto+ 100X has NOT been
designed to shred CDs or DVDs, any attempt to do so will invalidate this warranty.
guarantee
* ACCO Brands accepts no liability for product performance or safety when other types or brands of lubricants are used on
any part(s) of this machine.
The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a
dry cloth to maintain maximum product performance.
The auto-start infra-red sensor, located in the paper feed entry-slot, can occasionally become
covered in paper-dust causing the shredder to run despite no paper being fed into the
machine. Switch the shredder off at the rear of the machine and carefully clean the sensor
using a cottonswab.
6. maintenance
1
2