Place the device in learning mode, or press the Learning button on the back of the sensor
for about 3 seconds until the signal LED flashes, then confirm the operation on the app.
Once learned, the sensor symbol on the app will appear.
By clicking on the "settings" icon close to the sensor, you can set various parameters
(rename, delete), view the event list, and set the home automation scenarios.
Scenario Example: If Motion Detection is detected, send an email (the one used to register
the WiFi smart socket), turn on a lamp and turn it off after 1 minute.
Features
Power: 2x1,5V AAA
Operating Frequency: 433,050 MHz – 434,790MHz
Max Transmission Power E.I.R.P: -18,030 dBm
Radio Range: max 30m in open space
PIR Range: max 8m
Protection Degree: IP44
Angle view: Horizontal 120°, Vertical 90°
Versione Firmware/Software: V 1.0
Size: 55x43x72mm (H x W x D)
Weight: 70g
Declaration of conformity
The company KON.EL.CO. S.p.A. (P.za Don Mapelli, 75, 20099 Sesto San Giovanni, MI) as the manufacturer, declares under sole responsibility
that the product Brand iSnatch type: Wireless PIR Sensor code 68.0010.69/I - , referenced in this manual, complies with the essential
requirements of Directives 2014/53/EU. The declaration of conformity in complete form is available at
