12
2 | GENERAL INFORMATION
2.1
|
Reading and keeping the installation instructions
These instructions apply exclusively to the stated gazzini Turn
Signal Mount Set.
They contain important information on installation, safety and
the warranty. Read the instructions carefully, in particular the
safety instructions, before using the gazzini Turn Signal Mount
Set. Failure to follow the instructions may cause damage to the
vehicle. Keep these instructions for future reference. If you pass
on the gazzini Turn Signal Mounts to a third party, you must
hand over these instructions.
The installation instructions are based on the standards and
regulations valid in the European Union. If abroad, observe
country-specific guidelines and laws.
2.2
|
Explanation of symbols
The following symbols and signal words are used in these
instructions.
3 | SAFETY
3.1
|
Intended use
These gazzini Turn Signal Mounts can be used for installing turn
signals on your motorcycle forks. They fit on 38, 39, 40 and
41 mm diameter forks and are compatible with an M8 x 1.25
thread.
WARNING!
This signal word/symbol
indicates a hazard with a
medium risk level which, if not
avoided, may result in death or
serious injury.
CAUTION!
This signal word/symbol
indicates a hazard with a low risk
level which, if not avoided, may
result in minor or moderate injury.
NOTE!
This signal word warns of
possible material damage.
