ENG
14
Mirror installation
Connect the black wire (GND) to the car chassis, the yellow wire (BAT+) -
directly to the +12V terminal of the car battery or to the power line with
the constant voltage of +12V.
Connect the red wire (ACC+) to the car’s +12V (ACC+). Power ACC
turns on when the car key is in the II ignition lock position.
Connect the green wire (REVERSE) to the +12 V power wire of the rear
lights. In this case, whenever the reverse gear is engaged, the mirror will
switch to the rear-view camera mode.
Connect the video input jack (Camera IN) with the video output (VIDEO
OUT) jack of the rear-view camera.
Connect the switching unit jack to the corresponding jack on the mirror.
Fig. 3
АСС+ (red)
BATT+ (yellow)
GND (black)
RESERSE (green)
RESERSE (зеленый)
GPS Antenna In
GPS Antenna
(video output) (video input)
VID
E
O OU
T
Camera IN
DC+12V Out
PDC
Rear-
view camera
Автотовари
«130»
130.com.ua
