Version 17.11.2017
HW:CAM(V82)GD
RL3-MIB-4
P
a
g
e
15
2.7.
Picture settings and guide lines
The picture settings are adjustable by the 3 push-buttons on the video-interface. Press the
MENU button to open the OSD settings menu or to switch to the next menu item. Press UP
and DOWN to change the selected value. The buttons are placed inside in the housing to
avoid accidental changes during or after the installation. Picture settings must be done
separately for AV1 and AV2 while the corresponding input is selected and visible on the
monitor.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1/2 (no function)
Guide L/R (no function)
UI-CNTRL (guide lines ON/OFF) -
adjustments:
“All ON/All OFF”-Guide lines + PDC ON/OFF
Guide on -only guide lines
PDC on
-only PDC
Size H/V (picture size horizontal/vertical)
Note:
If there is no communication between the CAN box and the vehicle`s CAN-bus
(several vehicles aren’t compatible), the reverse gear guide-lines can`t be shown during the
vehicle’s operation, even if they once appear after having switched the system to powerless!
www.eldibg.com
car audio, multimedia & security systems
All manuals and user guides at all-guides.com
