Version 17.11.2017
HW:CAM(V82)GD
RL3-MIB-4
P
a
g
e
12
2.5.1.
Audio-insertion
This interface is only able to insert video signals into the factory infotainment. If an AV-
source is connected, the audio insertion has to be done by the factory audio AUX input or an
FM-modulator. The inserted video-signal can be activated simultaneously to each audio-
mode of the factory infotainment.
Note:
The pink- and black coloured audio switch cable is out of function!
2.5.2.
After-market rear-view camera
Some vehicles have a different reverse gear code on the CAN-bus which the video-interface
is not compatible with. In this case there are two different ways of installation. If the video-
interface is able to detect an enabled vehicle’s reverse gear, the green wire of the 6pin to
12pin cable should carry +12V while the reverse gear is engaged.
Note:
Do not forget to set video interface’s dip5 to ON before testing.
2.5.2.1.
Case 1: CAN-box receives the reverse gear signal
If the interface de12V on the green output wire of the 20pin interface cable while
reverse gear is engaged, the video interface will automatically switch to the rear-view
camera input “Camera IN” while the reverse gear is engaged.
Additionally, the +12V (max. 500mA) power supply for the rear-view camera can be
taken from the green wire of the 20pin connection cable.
www.eldibg.com
car audio, multimedia & security systems
All manuals and user guides at all-guides.com
