Gazer F117, User Manual

Page: 9 / 44

ENG ENG
9
• The indicator light (4) turns blue when the device is on and
flashes during recording. An auxiliary red indicator light (5) turns
on when the device is connected to a power source and when it is
charging. When the power is off, the red indicator light (5) turns
off as well. The device status can be determined not only by LED
indicators but also by on-screen indicators.
• When connected to a power source, the device switches to the
recording mode automatically, pressing the REC/OK (12) button
manually is not required.
• When the power is off, the MVR automatically stops recording,
saves the video file and shuts down. Prior (before turning off the
power) manual shutdown is not required. If necessary, you can
manually switch off the video recorder by pressing the ON/OFF (14).
• The MVR has protection against loop overwriting of recorded
files. This option is activated automatically when the G-sensor
turns on or if you manually press the (8) button. If this option
has been activated, the MVR protects the current video recording
from overwriting. Files protected from overwriting by G-sensor or
by pressing a corresponding button are recorded in a loop with a
30% limit of amount on the memory card. Files protected from
overwriting are stored on the memory card in the folder «CARDV/
MOVIE/RO», and the current files – in a folder «CARDV/MOVIE».
• The MVR has a video watermarking function. To insert a watermark,
go to the «Car plate settings» menu item and enter the desired text.
Note: Do not turn off the recorder manually if it is in the
recording mode for this may damage the last recording. First
stop the recording by pressing the «REC/OK» button (12) and
then turn off the device. The MVR can operate independently
for a certain period of time after the power is off. The offline
operation time depends on the condition and the remaining
charge of the built in battery.
Recommendation: Use the recording mode with a minimum
video length (2 minutes).
Usage
ENG