Gazer CM50-100, User Manual

Page: 30 / 92

30
ENG
Gazer multimedia system allows connecting a front view camera.
To enable front view camera display, do the following:
• Open “Settings” – “Factory settings”.
• Use the on-screen keyboard to enter the password ( “301530” by default).
• Open “Other” tab.
• Select “On” in the “Front Camera” menu item.
• Press “APPLY” and then “EXIT”.
• Press “OK” in the restart warning window.
• The changes will take effect after the system restarts.
One can also use the “Switch to front camera after reverse” menu item to configure the front view camera on time (from 1 to
10 sec.) after the rear view camera is turned off.
Front view camera settings
Changing boot logo
Note. When the front view camera is on, a new F-Cam app will appear in the installed apps list. It will allow watching
video feed from front and rear view cameras, provided they draw power from a constant power source.
To change the multimedia system boot logo, do as follows:
• Open “Settings” – “Factory settings”.
• Use the on-screen keyboard to enter the password ( “301530” by default).
• Open “Car Logo” tab.
• Choose the appropriate logo.
• Press “APPLY” and then “EXIT”.
• Press “OK” in the restart warning window.
• The changes will take effect after the system restarts.
Caution! To avoid malfunctions, we do not recommend changing any other system settings.