Gazelle with BOSCH System, User Manual

Page: 32 / 40

32
GAZELLE USER MANUAL BOSCH SYSTEEM
10. DIAGNOSING AND
REMEDYING FAULTS
The components of the eBike system are con-
tinuously and automatically monitored. When
an error is detected, the respective error code
is indicated in text indication
d .
Display
To return to the standard indication, press any
button on the Display
3
or on the operating
unit
10
.
Depending on the type of error, the drive is
automatically shut off if required. Continued
travel without assistance from the drive is
possible at any time. However, have the eBike
checked before attempting new trips.
For specific faults involving the battery, s ee
section 4.7 “Fault causes and remedies”.
For specific faults involving the charger, see
section 6.5 “Fault causes and remedies” .
Have all checks and repairs carried out
by your Gazelle specialist.
Code Cause Corrective Measure
410
One or more buttons of the Display
are blocked Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required
414
Connection problem of the
operating unit
Have connections and contacts checked
418
One or more buttons of the
operating unit are blocked. Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required
422
Connection problem of the
drive unit
Have connections and contacts checked
423 Connection problem of battery pack Have connections and contacts checked
424
Communication error among the
components
Have connections and contacts checked
426 Internal time-out error
Restart the system. If the problem persists, contact your Bosch eBike
dealer.
430
Internal battery pack of Display
empty
Charge Display (in holder or via USB port)
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
d
b
c
a
f
g
e