the light out of its holder. Underneath the detached light
you will find a red button
(C)
; slide this button forward. This
allows you to slide the cover of the light off and replace the
batteries.
Do you have a Spanninga Swingo front light
(see figs. 36
and 37)
? To replace the battery, you will need to prise the
lens off the light using a coin in the indentation
(B)
.
If the LED lighting still fails to light up even though the
cables and/or batteries are in order, then the fault can lie
in the electronics. It may also be the case that the bulb has
blown. You Gazelle specialist can check this out for you
and replace the defective components as necessary.
Rear light
Rear lights on Gazelle bikes are fitted with LED bulbs with a
very long lifespan. However, if your light is not working, it is
likely to be the batteries that are due for replacement.
On the Herrmans, Spanninga Brasa, SlimVision, BE Vision,
Gazelle LED XB, Gazelle No. 7 and Solo Vision rear lights,
you need to remove the screws
(B)
(see figs. 38 to 47)
.
You can then remove the cover or slide, after which you
can replace the batteries. NB: on the Solo Vision and the
37
Spanninga Swingo
36
Spanninga Swingo
42
BE Vision & SlimVision
43
BE Vision & SlimVision
41
Spanninga Brasa
40
Spanninga Brasa
39 Hermans/Racktime
38
Herrmans integrated into
carrier
16
Summary of Contents for Orange C330 HMB
Page 1: ...User manual...
Page 2: ......
Page 31: ...76 79 Balance 81 Flowline 78 80 77 Linea 87 Cadena 84 86 83 Finura 85 Delgado 82 31...
Page 51: ...51...
