3
EN
maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool
for operations different from those intended could
result in a hazardous situation.
h)
Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
5) Service
a)
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
Safety instructions for reciprocating saws
Hold the power tool by insulated gripping
surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its
own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding
the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
ECHNICAL DATA
Model
GM4560
Rated Power Input W
1300
No-load Strokes /min
0-2900
Length of Strokes mm
30
Max. Cutting Capacity(Wood/Steel Pipe) mm
255/130
Net Weight kg
3.8
※
Due to the continuing program of research and development, the specifications herein are subject to change
without prior notice.
INSTRUCTIONS FOR OPERATION
• Installing the Saw Blade
Rotate the sleeve according to the direction of the
arrow, put the blade part of the saw blade up or down
and insert the saw blade, make the hole on the knife
handle aim at the protruding part in the clamping
sleeve of the blade, then release the sleeve and the
chuck will automatically fix the saw blade.
CAUTION: Always be sure that the tool is switched
off and unplugged from the supply outlet before
installing or removing saw blade.
• Adjusting the Shoe
Press the button in the direction of arrow, slide back
and forth, adjust the shoe to the desired position, put
down the button to fix the shoe.
• Switch Operation
To start the tool, simply pull the switch button. Release
the button to stop. For continuous operation, pull the
button and then push in the lock button. To stop the
tool from the locked position, pull the button fully and
then release it.
Speed can be adjusted by turning the speed control
Symbol
To reduce the risk of injury, user must
read instruction manual
WARNING
Class II tool
Summary of Contents for GM4560
Page 8: ......