6
EN
Technical data
Model
GC2038
Rated Voltage(V
)
20
Wheel Size(mm)
Ø125x4xØ22
Rated Speed (/min)
8500
Spindle Thread
M14
Net Weight
(
whitout battery) kg
1.6
※
Due to the continuing program of research and development, the specifications herein are subject to change
without prior notice.
※
Illustrations,figures and photos may vary slightly due to program of continuous product improvements, please
in kind prevail.
before use. Always use the correct charger and refer
to the manufacturer’s instructions or equipment
manual for proper charging instructions.
n) Do not leave a battery on prolonged charge when
not in use.
o) After extended periods of storage, it may be
necessary to charge and discharge the cells
or batteries several times to obtain maximum
performance.
p) Retain the original product literature for future
reference.
q) Use the cell or battery only in the application for
which it was intended.
r) When possible, remove the battery from the
equipment when not in use.
s) Keep the cell or battery away from microwaves and
high pressure.
t) Dispose of properly.
VOLTAGE WARNING:
Before connecting the machine to a power source
(receptacle, outlet, etc.), be sure the voltage supplied
is the same as that specified on the nameplate of
the machine. A power source with voltage greater
than that specified for the machine can result in
SERIOUS INJURY to the user, as well as damage
to the machine. If in doubt, DO NOT PLUG IN THE
MACHINE. Using a power source with voltage less
than nameplate rating is harmful to the motor.
SAVE THESE INSTRUCTIONS.
WARNING! MISUSE
or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Symbol
Do not burn
Do not charge a damaged battery pack
Do not dispose of batteries.
Return exhausted batteries to your
local collection or recycling point.
To reduce the risk of injury, user must
read instruction manual
WARNING
Always wear eye protection
Always operate with
two hands