background image

 

G9701 Infrared Thermal Imager 

 

vi 

Laws and Regulations 

 

Use of the product must be in strict compliance with the local electrical safety 

regulations. 

Transportation and Storage 

 

Keep the device in original or similar packaging while transporting it. 

 

Keep all wrappers after unpacking them for future use. In case of any failure 

occurred, you need to return the device to the factory with the original wrapper. 

Transportation without the original wrapper may result in damage on the device 

and the company shall not take any responsibilities. 

 

Do not drop the product or subject it to physical shock. Keep the device away from 

magnetic interference. 

Power Supply 

 

Please use the power adapter, which is provided by normal company. Input voltage 

should meet the Limited Power Source (5 VDC, 2A) according to the IEC61010-1 

standard. Please refer to technical specifications for detailed information. 

 

Make sure the plug is properly connected to the power socket. 

 

DO NOT connect multiple devices to one power adapter, to avoid over-heating or 

fire hazards caused by overload. 

Battery 

 

Improper use or replacement of the battery may result in explosion hazard. Replace 

with the same or equivalent type only. Dispose of used batteries in conformance 

with the instructions provided by the battery manufacturer.   

 

Do not charge other battery types with the supplied charger. Confirm there is no 

flammable material within 2 m of the charger during charging. 

 

For long-term storage of the battery, make sure it is fully charged every half year to 

ensure the battery quality. Otherwise, damage may occur. 

 

DO NOT place the battery near heating or fire source. Avoid direct sunlight. 

 

DO NOT swallow the battery to avoid chemical burns. 

 

DO NOT place the battery in the reach of children. 

Maintenance 

 

Clean the lens with soft and dry cloth or wiping paper to avoid scratching it. 

 

Wipe the device gently with a clean cloth and a small quantity of ethanol, if 

necessary. 

 

If the product does not work properly, please contact your dealer or the nearest 

Summary of Contents for G9701










































Reviews: