52
Error messages on the cycle computer
Warnings
This disappears if the error is fixed.
Code
Display
preconditions
Operational restrictions
while warning is
displayed
Remedy
W010
The temperature of
the drive unit is high.
The level of assistance
may decrease.
Stop using the assist function until the temperature of
the drive unit drops.
If the situation does not improve, contact the place of
purchase.
W011
The traveling speed
cannot be detected.
The maximum speed up to
which power assistance is
provided may decrease.
(Power assistance is provided
up to 25 km/h in top gear.)
Check that the speed sensor is properly installed.
If the situation does not improve, contact the place of
purchase.
W030
Two or more assist
switches are
connected to the
system.
Gear shifting is not
available for electronic
derailleurs.
Change the assist switch to the gear shifting switch, or
connect only one assist switch and turn on the power
again.
If the situation does not improve, contact the place of
purchase.
W032
An electronic
derailleur may have
been installed in
place of a
mechanical
derailleur.
Power assistance
provided in [WALK]
mode may be lower
than usual.
* The walk assist mode
function may not
available in certain
regions.
Reinstall the derailleur for which the system is
configured to support.
If the situation does not improve, contact the place of
purchase.
-
A communication
error between the
drive unit and the
motor unit was
detected.
Gear shifting is not
available for electronic
derailleurs.
Check that the cable is properly connected between the
drive unit and the motor unit.
If the situation does not improve, contact the place of
purchase.
59
