L:\WP51\Instructions\SOLARIUMS INSTRUCTION BOOKS\W1207\ZZZ-187.W1207.GP.EN.REV5.doc SUN-HO-REV5 3
ASSEMBLE PIECES
BEFORE SCREWING
THEM TO THE WALL
STEP #4
Set polycarbonate exposed side on the outside over horizontal left guide I-3, use one (1) Rr-3 panel, one (1)
P-3 joint and one (1) Ss-3 panel, then do the right side with one (1) Tt-3 panel, one (1) Q-3 joint and one (1)
Uu-3 panel over the J-3 horizontal panel. Secure P-3 and Q-3 to I-3 and J-3 respectively with self-tapping
screws.
NOTE:
Once the wall track is in place,
apply silicon along the top of the
wall track and at the joint of the
two tracks.
Silicon is not
supplied.
STEP #3
Assemble ML-3, N-3, O-3, and MR-3 as shown
and position evenly above vertical guides. Secure
wall track and vertical tracks to brick or cement
wall by drilling through the aluminum and using
screws Xx-3. Insert the 2 horizontal guides, I3 & J3
at the top of the frame. Make sure the 2 frames
are at the correct level, if not, use shims to
compensate. Do not use tools to force.
