5
ZZZ-212.43200-32.1127-15.GP.EN.HER.doc
HER-HP
Step 9:
Slide the indicated polycarbonate
panels into the spaces between the
rafters, using the top groove of each
rafter. Ensure the side meant to face
the sun is on the outside. Use a
rubber hammer to carefully tap each
panel into the grooves.
Step 10:
Insert the middle roof joints in between the rafters and slide them up under the polycarbonate panels.
Tap lightly to ensure the panel is fully in the slot. Seen from above, most of the joint as well as the
drain holes should be beneath the roof panels.