3
ZZZ-212.43200-32.1127-15.GP.EN.HER.doc
HER-HP
Step 5:
Attach mounting brackets “O” and “P” to rafters “M” and “N” respectively. Use threaded hole about 8”
from end of rafter.
Lift central hub “L” to a height of about 110” (2.79m) at the center of the gazebo. (Caution: this part
may be heavy, use support as needed)
Attach one end
of rafter “M” to the hub using 2 bolts “Pp”. Attach other end with mounting bracket to
the corner of the beam assembly with 2 bo
lts “Pp”. Use the set of holes closest to the inside. Repeat
with remaining “M” rafters.
Similarly, attach one end
of rafter “N” to the hub using 2 bolts “Pp”. Attach other end with mounting
bracket to the beam assembly with 2 screws “Qq”. Use the set of holes closes to the inside. Repeat
with remaining “N” rafters.
Step 6:
Once all rafters are in place, install top
cap “K” over central hub “L”. Use flat
washers and acorn nuts “Vv” to secure
tightly.
Pp
Pp
