background image

 
 
 
 

Gavita HortiStar 1000 DE EU reflector 

Gavita HortiStar 1000 DE EU  v 2.0 

page 6 

Changes reserved 

Version september 2013 

 

Technical specifications 

Dimensions  

: 20.1” / 511 mm (length) x 9.6” / 244 mm (width) x 7.6” / 193 mm (height) 

Lamp holder   : Vossloh Schwabe k12 x 30s 

Reflector  

: Gavita HortiStar HR 96 1000 DE Miro aluminium reflector 

Lamp cord  

: Optional 

Ambient temp.  : 0-35° Celsius   

Made in the European Union according to EN 60598-2-1 

This reflector should be used below 2000 m above sea level.  

 

 

Warning symbols explained 

 

 

Warning: Use self shielding lamp only. 
Only use lamps that are suitable for open reflectors and have UV blocking glass. 

 

Warning: Reflector temperature > 85° Celsius 
Do not touch the aluminum reflector when operating to prevent injuries. 

 

Minimal distance to object 80 cm using a 1000W HID lamp 
Keep the lamp 80 cm from lighted objects to prevent fire risk. 

 

 

 

Warranty 

GAVITA Holland warrants the mechanical and electronic components of this product to be free of defects in 

material and workmanship if used under normal operating conditions for a period of three (3) years from the 

original date of purchase. If the product shows any defects within this period and that defect is not due to user 

error or improper use GAVITA Holland shall, at its discretion, either replace or repair the product using suitable 

new or reconditioned products or parts. For HPS lamps the warranty period is one (1) year from the original date 

of purchase. In case GAVITA Holland decides to replace the entire product, this limited warranty shall apply to the 

replacement product for the remaining initial warranty period, i.e. three (3) years from the date of purchase of the 

original product. For service return the luminaire to your shop with the original sales receipt. 

For more information about electronic ballasts please visit our website www.gavita-holland.com 

 

 

 

 

 

Summary of Contents for Pro Series








Reviews: