35
6.6.
Activate or deactivate the lights manually or set
automatic mode
Warning!
When replacing a light, setting the ballast to “Off” to override the
clock is insufficient! ALWAYS disconnect the ballast from the mains.
Warning!
When the controller “Output mode” is set to “on” or “off”, the
temperature safety features of the controller will not work.
Note:
The on and off mode are included to allow for replacement of ballasts
and testing of lamps.
•
Press “enter”, the controller menu will open
•
Press the arrow keys
to locate “Output mode” and press “enter”
•
Press the arrow keys
to switch between “auto”, “on” and “off”
-
Select “on” to turn all the lights on. This setting will ignore
temperature safety settings. (see paragraph 6.4)
-
Select “off” to turn all the lights off
-
Select “auto” to follow the programmed light cycle (see paragraph
6.2) and temperature safety settings (see paragraph 6.4)
•
Press “enter” to confirm your choice.
6.7.
Resetting the controller to factory settings
The factory reset will return all values to factory settings. It will also undo any
changes to the temperature calibration of the temperature sensors.
•
Press “enter”, the controller menu will open
•
Press the arrow keys
to locate “Factory Reset” and press “enter”.
The “Factory Reset” screen opens
•
Press the arrow keys
to switch to “yes” and press “enter”.
The controller is now reset to factory settings.