7.
Installation
Warning!
Mounting and installing of the fixture may only be executed by certified
service personnel, in accordance with the applicable local laws and regulations.
Warning!
The fitter is responsible for correct and safe installation.
Warning!
Ensure the local cabling can support the voltage and current
requirements of the fixture.
Warning!
Avoid coiled cords and keep mains leads separated. This prevents
electromagnetic interference.
Warning!
Do not connect or disconnect the Wieland RST20i3 plug under load.
7.1.
Installation preparations
•
Switch off mains power.
•
Read the Gavita light distribution plan.
•
If not done already, install the lamp in the fixture (see paragraph 10.2).
•
If not done already, screw the mounting point into the fixture (3).
7.2.
Installing the fixture
•
Mount the suspension bracket* according to the light distribution plan.
•
Hang the fixture by its two mounting points onto the suspension bracket (4). The
two mounting points are spaced 30 - 32 cm / 11.81 - 12.59 inches apart.
Caution!
Always hang the fixture horizontally. Adjustments can be made by
screwing the mounting point in or out.
To install other fixtures, repeat the steps at paragraph 7.1 and 7.2.
* The suspension bracket is delivery dependent, it may differ from the image.
B2
B3
B1
3.
1000W
1 m -
40 in
750W
0.75 m -
30 in
4.
B1
B2
B1
B2