background image

27 / 28

16540_jh_V1

Notes on environmental protection

Disposal notes

This symbol on the product, user manual or packaging indicates 

that this product must not be disposed of with other household 

waste at the end of its life. It must be handed over to the appli-

cable collection point for the recycling of electrical and electronic 

equipment. 
The materials are recyclable as marked. By recycling, material 

reusing or other forms of scrap usage you are making an import-

ant contribution to environmental protection. 
Batteries and accumulators must be removed from the device 

and disposed of at an appropriate collection point. Please inquire 

if necessary from the local authority for the appropriate disposal 

site.

Care and maintenance

Notes on care

The product does not need any maintenance, it works so as it 

is without any special care. In your own interests protect it from 

dust, dirt and moisture. 

Warranty certificate

The Graupner, Henriettenstrassee 96, 73230 Kirchheim/Teck 

grants from the date of purchase of this product for a period of 

24 months. The warranty applies only to the material or opera-

tional defects already existing when you purchased the item. 

Damage due to misuse, wear, overloading, incorrect accesso-

ries or improper handling are excluded from the guarantee. The 

legal rights and claims are not affected by this guarantee. Please 

check exactly defects before a claim or send the product, 

because we have to ask you to pay shipping costs if the item is 

free from defects.
The present construction or user manual is for informational pur-

poses only and may be changed without prior notice. The cur-
rent version can be found on the Internet at 

www.graupner.de

 on 

the relevant product page. In addition, the company 

Graupner

 

has no responsibility or liability for any errors or inaccuracies that 

may appear in construction or operation manuals. 
No liability can be accepted for printing errors.

P

Summary of Contents for HoTT Hornet 250





























Reviews: