S401.100 ADVANCED MULTIPURPOSE TRAINING ARM
|
USER GUIDE
Introduction | 5
1. INTRODUCTION
1.1 SPECIFICATIONS
Weight: 12 lbs
Length: 19 inches
The S401.100 Advanced Venous Training Arms accurately represent an adult arm and hand,
complete with the Cephalic, Basilic, Antecubital, Radial, and Ulnar veins. The simulators
also feature subcutaneous injection sites on the volar side of the forearm and the lateral
side of the upper arm, as well as an intramuscular injection site in the deltoid area.
1.2 CARE AND MAINTENANCE
General
•
Do not wrap this or any other Gaumard product in newsprint.
•
Marks made with ballpoint pens, ink or marker cannot be removed.
•
Replacement parts are available from Gaumard or from your distributor.
•
Do not use povidone iodine or Betadine type antiseptic solutions
as these may permanently stain the simulator.
CAUTION: Damage caused by misuse is not covered by your warranty. It is
critical to understand and comply with the following guidelines.
Cautions
•
Use the venous training arm with the same precautions used with a real patient.
•
Have providers wash their hands prior to use to prevent dirt and oils from clinging to the material.
•
Do not palpate using ingernails as this may tear the skin; palpate using the pads of the ingers.
•
Vein tubing contains latex, which may cause allergic reactions. Users allergic or sensitive to latex should
avoid contact. Discontinue use of this product and seek medical attention if an allergic reaction occurs.
Operating Temperatures
•
Operating temperature: 50°- 95° F (10°- 35° C).
•
Humidity: 5% - 95% (non-condensing).
