S401.100 ADVANCED MULTIPURPOSE TRAINING ARM
|
USER GUIDE
30 | Routine Maintenance
Reconnecting the Vein Tubing
1.
Both ends of the vein tubing should be visible
through the upper arm opening. Reconnect
the end of the vein tube that leads to hole
#1 to the thicker, clear illing hose.
NOTE: Be sure to slide the vein tubing so
that it is lush to the very bottom of the
white connector that is on the ill hose.
2.
Reconnect the end of the vein tubing that leads
from hole #10 to the slimmer drainage clear hose.
NOTE: Be sure to slide the vein tubing so
that it is lush to the very bottom of the
white connector that is on the drain hose.
3.
Replace the injection pad over the
opening in the upper arm.
NOTE: Refer to section "5.1 Replacing
the Arm Skin" for instruction on
how to reattach the arm skin.
Please contact Technical Support if further
assistance is needed for the reveining process.
