NOELLE S554.100 |
User Manual
8 | Equipment Setup
3. Equipment Setup
3.1 Overview
NOELLE is shipped partially assembled. The birthing fetus and neonate
are fully assembled. Perform the following steps as part of the first install
process.
Leg Assembly
1.
Remove the fixed bolts from
the knee joints using the hex-
agonal wrench provided.
2. Position the lower legs and
re-insert the knee joint bolt.
Then, secure the knee bolts
without over tightening.
Power Supply
Connect the power supply to the
wall outlet, and then connect to the
power input located on NOELLE’s
right side.
Always operate NOELLE with
the power supply connected.
NOELLE is equipped with an internal backup battery to maintain func-
tionality in the event the power adapter is unplugged, or the simulator is
requires transportation from one room to another.
WARNING: Do not store the simulator with a discharged battery.
Re-charge the system at least once every 3 months if the simulator
is not being used; otherwise permanent loss of capacity will occur.
Summary of Contents for NOELLE S554.100
Page 2: ......