S230.200 ADVANCED ZACK™
|
USER GUIDE
16 | Working with Advanced ZACK
Urethra
The urethra on the S230.200 leads to a bladder that can be filled for catheterization procedures.
To fill the bladder:
1.
Obtain the syringe from the "Fill and Drain Kit"
and screw the fill connector to the syringe.
2.
Fill the syringe with clean distilled water.
3.
Lift up the skin flap on the right side of the
simulator to reveal the labelled ports. One
is for "AIR" and one is for "LIQUID".
NOTE: The "AIR" port should only have
air inputted. This port fills an air reservoir
to assist with pressurizing the liquid
bladder bag next to it. How to use this
port is explained in the next section.
The "LIQUID" port should only have fluid
inserted. This will be the source of fluid
when catheterization is performed.
Summary of Contents for ADVANCED ZACK S230.200
Page 2: ...S230 200 ADVANCED ZACK USER GUIDE ii...
Page 37: ......
