14
GAUI
TAI SHIH HOBBY CORPORATION
開啟發射機並確認油門為鎖定狀態。
將發射機油門(上)推時CCPM3顆伺服機需同時向上做動並將十字盤上推。
1. Turn on the throttle hold on transmitter.
2. Moving throttle stick upward, all CCPM servos should move upward.
3. Moving throttle stick down, all CCPM servos should move downward.
4. Moving aileron stick to the right, swashplate should acts like this:
AIL - upward, PIT - downward, ELE - fixed
5. Moving elevator stick up, swashplate should acts like this:
AIL - downward, PIT - downward, ELE - upward
6. Set gyro to head locking mode from transmitter.
moving rudder stick to the right, tail rotor linkage should
moves to gear box side. If not, please reverse the
servo direction on transmitter.
將發射機副翼(右)推時十字盤做動如下:
AIL-上推十字盤，PIT-下拉十字盤，ELE-不做動。
將發射機升降舵(前)推時十字盤做動如下。
AIL-下拉十字盤，PIT-下拉十字盤，ELE-上推十字盤。
將發射機油門(下)推時CCPM3顆伺服機需同時向下做動並將十字盤下拉。
Mode 1 Mode 2
Mode 1 Mode 2
Mode 1 Mode 2
Mode 1 Mode 2
Mode 1 Mode 2
4
Checking Servo Travel Direction
伺服機做動方向
將發射機的{陀螺儀感度}設定至鎖定狀態，向(右)推尾舵搖桿，
尾軸滑套需向尾齒箱移動，若不是請調整遙控器選單中的伺服機正反向設定。
